Cooking Beef Tenderloin in a Roaster Oven

Excellence vs. Perfection

I have not always been a chef. No, my roundabout education began as a music major at a small junior college with a proud and wonderful music department. Every year at the end of spring semester the students gave recitals as part of their studies. I would sit and listen to amazing young musicians, many of whom would go on to prestigious universities and conservatories to further their studies. Their skill was undeniable as was their promise, and the applause they received was not feigned or given out of politeness. But if one was to compare one of the many vocalists, pianists, or horn players to concert professionals, there was no comparison. Scott and Jenny could in no way compare to Emanuel Ax or Vladimir Horowitz.

There is a difference between very good, or excellent, and perfect. In an Internet full of hyperbole and over-exaggeration, where superlatives are neutered by ubiquity, that can be hard to remember, but it is an important truth.

---

Contents:

• Tenderloin difficulties
• What is tenderloin?
• Proposed cooking methods
• Demonstration
• Results
• Recipe

A perfect dinner

This is the season of greatest festivity, with friends and family coming together in the darkest month of the year to celebrate in the light of love and friendship—a sentiment often expressed through lavish and lovingly prepared meals. The holiday season is one where, as hosts, we perceive more keenly the difference between excellence and perfection.

Perfect tenderloin?

So what does perfection mean in a beef tenderloin? An excellent tenderloin is nicely pink in the center, is not tough or dry, and has good browned flavor on the outside. Aperfect tenderloinis done just right, with an even color from one side to the other with no grey ring. It is tender, enough to cut with a fork and is filled with its natural juices. Perfection means not overcooking any of this expensive cut. It means letting the quality of the meat shine in its own right. Tenderloin perfection means that no matter whether you serve it hot from the oven for a dinner or cold sliced on a mid-day buffet, it is tender and juicy.

Tenderloin problems

Perfection, thus named, is inhibited by two prime elements: guests and biology. It is a sad fact that some guests like overcooked meat, even cuts of meat with the potential for a texture one could describe as "buttery." If Uncle Phil just can't abide even a shade of pink in his roast, is the rest of the party is doomed to suffer his philistinism with him? No! Tenderloin is actually a perfect dish for this circumstance. Tenderloin can be cooked to a perfect medium rare—which is as low as most guests will want their meat to be cooked—and any dissenters can be appeased by quickly browning their slice in a hot pan with some butter and, if you are feeling particularly magnanimous, a sprig of fresh thyme.

Biology is a more difficult adversary than Uncle Phil. The very composition of the tenderloin (which we will cover in greater depth below) presents challenges for the cook. Tenderloin is actually quite an unforgiving cut of meat. overcook it by just a few degrees and your beautiful, expensive roast will be tough and dry. So how can we keep in the good graces of this king of cuts? Let us look first at the tenderloin itself to learn what its nature will tell us about to cook it. Then we will consider various methods for cooking, try a demonstration of them, and observe the results. In this way, we can hope to achieve a perfect roast despite the difficulty of the meat and the objections of Uncle Phil.

What is tenderloin?

Tenderloin, the psoas major muscle, is properly named: it is one of the most tender muscles of a cow. It runs from the last ribs of the cow back to the rear hip. The muscle is responsible for moving the leg forward, but not for lifting it. That lack of resistance work translates to amazing tenderness when cut for steak or a roast. It is also one of the most sought-after and priciest cuts, with a mere ~14 pounds of pre-trimmed tenderloin available per 1200 pound cow. Natural tenderness means there is little connective tissue in the meat, so we needn't cook it to a high temperature to make it palatable.

➤Composition

Not only does the tenderloin have little connective tissue, but it also has very little fat. Among the leanest of the beef cuts, tenderloin relies on the muscle fibers themselves (not on massive seams of fat like a prime rib) for flavor and on protein-bound water for juiciness.

➤What that means for cooking

These biological facts combine to paint a picture of how we might cook this meat:

• it will be tasty and tender at lower pull temperatures because of the lack of connective tissue
• cooking it too far will dry it out because there are no fat stores to keep it moist and the contraction of the muscle fibers at high heat will expel the water bound in the muscle

And so

• we should try to avoid high temperatures and
• we should consider dissolving some proteins with salt before cooking to help retain the moisture

Accepted methods for cooking beef tenderloin

The food web and a great many cookbooks (very many of them highly reputable) recommend blasting a tenderloin in a hot oven, 450–500°F (232–260°C), for a relatively short time to cook it, followed by a counter rest. The justification lies in the air-searing of the exterior, creating a crust of delicious Maillard browning.

Other authors and chefs call for a lower heat and slower cooking, usually preceded by a sear in a hot pan for the Maillard effect. Less drastic thermal gradients should lead to a more even cook through the width of the roast, though we may be sacrificing a crust due to the natural basting that will occur over a longer cook, eliminating some of the crispness of the crust.

Some recipes call for a reverse sear, but the "flying blind" nature of searing after cooking, when the meat is already heated and stands in danger of overcooking, is hard for to accept. Keeping a probe thermometer in the meat during a sear is difficult, and we want as close to an exact finish temperature as we can get. Based on our previous trials with prime rib, we opted to go for a chill-sear-cook method for one of our tenderloins. We tested the high-oven temp method with the other tenderloin.

We wanted to see which method resulted in a more perfect Christmas roast. So we got out our Smoke ^®  dual-channel thermometer and got to work. The Smoke is perfect for larger roasts that take a little longer in the oven because the receiver allows you to go about your business while keeping a weather eye on your rising meat temperatures.

Method of experiment

To determine the best cooking method, we took two tenderloins of comparable size, salted them with about 2 Tbsp of coarse kosher salt, and tied them with butcher's twine to create two roughly even cylindrical shapes. We placed Pro-Series ^® penetration probes ~¼" below the surface of each to track our chill temps and placed them in the freezer at 2°F (-17°C) until our Smoke's low-alarm sounded at our set 29.5°F (-1°C) (roughly 90 minutes). At this point, the exterior of each roast was cold enough to be stiff to the touch—partially frozen. We prepared a rub of olive oil, black pepper and minced fresh parsley, thyme, and garlic to coat each roast.

We seared the first tenderloin on a 450°F (232°C) cast iron griddle (but a roasting pan can work too), then rubbed it with the herb-oil mixture and placed it on a wire rack set into a cookie sheet in a 225°F (107°C) oven, we re-set our penetration probe and set the high-alarm on our Smoke to125°F (52°C). Lastly, we started a count-up timer on a TimeStack^TM to keep track of the cook time.

The second tenderloin was rubbed with the herb mixture straight out of the freezer and placed on a wire rack set into a cookie sheet in a 475°F (246°C) oven. Again, we placed our Smoke probe in the center of the roast and set the high-alarm for 125°F (52°C). We used one of the other channels on our TimeStack to start a count-up for the high-oven roast.

When each roast's high alarm sounded, we verified the temperature with a Thermapen ^® and allowed them to rest on the countertop to re-absorb juices and finish carryover cooking. The slow-heat roast was given about 10 minutes of rest, and the high-heat roast was given at least 20 minutes. (Lower heat cooking methods require less resting because the temperature gradients don't have as far to equalize.)

Results and comparison

The roast in the high oven reached its pull temp in just about 45 minutes, while the tenderloin in the lower-temp oven took much longer, clocking in at about 95 minutes. The time difference was significant, but, as we'll show, the wait was well worthwhile.

➤Color, crust, texture

The high-heat roast had a slight crust that impeded the initial knife cut but added very little to enjoyable texture. It was beautifully pink in the pink center but was surrounded by a 1/4–1/2" grey band all around the edge. Once we began cutting, the meat yielded nicely to the knife and was tender and tasty. It was a great roast, one that a cook could put before guests without embarrassment and which would prompt sincere compliments.

But the low-heat roast. Oh, the low-heat roast. The low-heat roast had no substantial crust to it, but was perfectly pink and evenly colored from edge to edge, with no discernable grey band at all. The tenderloin was visibly juicy and yielding under the knife and had a texture that was surprising in its tenderness and softness. You could cut it with a spoon. It was a roast that a cook could present with the full expectation of immediate and enthusiastic praise (as well as fond mentions months later).

➤Herb rub

One other difference was noticeable aside from the coloration and texture of the meat itself, and that is the effects of the heat on the herb-rub. The herbs and garlic on the high-heat roast had a much paler flavor than the low-heat version. This makes sense, as the high heat drives out the volatile oils and fragrances from herbs, and cooks the garlic more completely. The herb rub on the low heat-roast was more vibrantly herbaceous, with a more pronounced garlicky bite. We will address that in the recipe below.

Final outcome

Tenderloin cooked in a225°F (107°C) oven on the left compared to one cooked at475°F (246°C) on the right.

Both of these roasts were pulled from the oven at 125°F (52°C). Notice the consistently pink meat edge to edge on the left. This is the difference between excellence and perfection. The high-temperature tenderloin is very tasty, but the low-temperature tenderloin is evenly colored, soft, juicy and amazing.

Taking thermal control of your beef tenderloin roast by limiting the thermal gradients and monitoring the temperature results in a stunning presentation piece of the highest quality. And the Smoke thermometer, with its Pro-Series probes and wireless receiver, makes getting perfect easy.

Perfect Roast Beef Tenderloin

based on a recipe by Bon Appétit

Ingredients

• 1 beef tenderloin, trimmed
• Coarse kosher salt
• 1/4 C olive oil, plus more for searing
• 1 tsp black pepper
• 2 Tbsp minced fresh parsley
• 1 tsp minced fresh thyme
• 2 cloves minced garlic (to lessen the garlicky bite, you could cook it slowly in the oil over medium heat for a minute or two, then let the oil cool with the garlic in it)

Instructions

• Tie (or have your butcher tie) the tenderloin into a mostly uniform shape, with the tail-end folded up under the roast to help form a uniform thickness.

  

• Salt the tenderloin generously and place in the freezer until the outside is chilled and well firm (partially frozen), about 30°F (-1°C).
• Preheat an oven to 225°F (107°C).

We set Smoke's low-temp alarm to 30°F (-1°C) and inserted the probes ~1/4″ under the surface.

• Preheat a cast-iron skillet, heavy roasting pan, or griddle to 450°F (232°C).
• Add 1-2 Tbsp oil.
• Sear the tenderloin on all sides until well browned—about two minutes per side.

  

• Rub the tenderloin all over with a paste made of the oil, pepper, parsley, thyme, and garlic.

  

• Place the roast on a wire rack set in a baking sheet.
• Insert a probe into the thickest section and place the roast in the preheated oven.
• Set the high-temp alarm on your Smoke for 125°F (52°C) for medium rare (higher for more well-done) and cook the roast.

  

• When the timer sounds, verify the temperature with your Thermapen^®. If the lowest temperature seen is 125°F (52°C), remove it from the oven and allow it to rest on the counter for 5-10 minutes before slicing and serving.

• 

• 

For many things in life, excellent is good enough. But for your holiday tenderloin roast, you truly can have perfection. All it takes is a little extra preparation and careful monitoring of your internal temperature.

---

Shop now for products used in this post:

References

• Bon Appétit
• Univeristy of Guelph Department of Animal Biosciences, Major Muscles of the Carcass
• J. Kenji López-Alt on SeriousEats.com

traylorlocatell.blogspot.com

Source: https://blog.thermoworks.com/beef/simple-perfect-roast-beef-tenderloin/

Share this post